I finally got round to starting to build the QRP Labs CW txvr kit which I’ve had since the 2018 Hamfest. Well, no sense in rushing things. I mentioned before the quality of the kit and the really excellent documentation PDF. I think I’m up to page 25. The documentation is all step by step and easy to follow, with a drawing on each step showing what goes where.
The one I got is for 40m – the kit comes with a low pass filter and components specific to the band you request. Of course I do still need to learn Morse! That’s still on my list of things to do which includes finish the QO100 project which now has two more kits of parts to build, and read up on the full licence for when, hopefully they release the online exam.
Here is a shot of the wound components which, although time consuming was actually quite fun.
And finally the completed board with the LCD in place. I went through the alignment process which all went according to plan using the built-in menus. The first pic is of the board powered and aligned and the second a bit of CW decode but this is on an 11m wire dipole with no ATU.
It is possible to mount this in a case and there is a wiring diagram included showing what goes where etc. once the various components are taken off the board – or, rather, not put on the board in the first place. But I will keep mine skeletal, at least for now.